Differences

This shows you the differences between two versions of the page.

--- en:signals:gnd [2017/10/21 22:06] – created MWanke
+++ en:signals:gnd [2024/09/22 00:28] (current) – external edit 127.0.0.1
@@ Line 4: / Line 4: @@
 \\
-==== Other ====
+Other:
   * CGND - "Chassis-Ground" - normally connected to the chassis
   * DGND - "Digital-Ground" - in combination with digital modules with analog input
@@ Line 10: / Line 10: @@
   * SGND - "Signal-Ground" - often used for negative voltage levels in analog circuits, e. g. audio
-==== Hint ====
+===== Hint =====
-The problem with this (or all) naming is that these are only names, not binding standards or norms. Therefore, great care should always be taken when assigning such names in the circuit diagram design, and only introduce new or additional names if the supply voltage in question is physically decoupled from other voltages in the circuit (e. g. via a choke coil), and if it is used on several component pins.
+The problem with this (or every) naming is that these are only names, not binding standards or norms. Therefore, great care should always be taken when assigning such names in the circuit diagram design, and only introduce new or additional names if the supply voltage in question is physically decoupled from other voltages in the circuit (e. g. via a choke coil), and if it is used on several component pins.
 \\